Lowest Price Changlin 955n 5ton Front End Wheel Loader with Weichai Engine

The features of Changlin 955N wheel loader 5 tons :

1) 955L upgraded version (Chang Lin new appearance),

2) High-performance, low fuel consumption

3) Peer mainstream configuration (engine bivariate hydraulic system);

4) Medium-and long-wheelbase body, short wheelbase car's turning radius

5) Speed advantage, the fastest in this line.

6) The vacuum hydraulic oil tank avoid leaking, very convenient to maintain the hydraulic system,also ensures that the hydraulic system get the cleanest oil, greatly extending the hydraulic components.

Overall Dimension
1	Length(with bucket on ground)	8100(mm)
2	Width(to outside of wheels)	2800mm)
3	Bucket width	2946(mm)
4	Height(To the top of the cab)	3500(mm)
5	Wheel base	3100(mm)
6	Tread	2200(mm)
7	Min. ground clearance	450(mm)
Main Technical Specification
1	Rated load	5000(Kg)
2	Operating weight	16300KG
3	Rated bucket capacity	3(m3)
4	Max. breakout force	160kN
5	Max. dump clearance	3091(mm)
6	Dump reach	1090(mm)
7	Dump angle at any position	≥ 45º
8	Min. turning radius
	(1) Outside of bucket	6575(mm)
	(2) Outside of rear wheel	5970(mm)
9	Pivot angle frame	38
10	Oscillating angle of rear axle	±13º
11	Lifting time of bucket	≤ 6.2(sec.)
12	Lowering time of bucket	≤ 3.8(sec.)
13	Dumping time	≤ 1.8(sec.)
14	Traveling speed (Km/h), 2 forward and 1 reverse
	(1) 1st gear forward	12.1 km/h
	(2) 2nd gear forward	37.4 km/h
	(3) 1st gear reverse	16.5 km/h
Diesel engine
1	Model		Chinese Engine WD10G220E23
2	Type		Direct injection. Naturally aspirated. Water cooled
3	Rated output		162(KW)
4	Cylinder diameter/stroke		126 /130 (mm)
5	Total exhaust of cylinder		9.726 (L)
6	Power of starting motor		7.5 (kw)
7	Voltage of starting motor		24(V)
8	Rated speed		2000(r/min)
9	Max. Torque		900(N. M)
10	Starting mode		Electrical starting
11	Min. specific fuel consumption		220(g/Kw. h)
12	Specific oil consumption of engine		0.95-1.77 (g/kW.h)
13	Net weight		1000 (kg)
Transmission System
1. Hydraulic Torque Converter
1	Model	ZL50B-012
2	Type	4-elements. Single stage
3	Torque ratio	4
4	Cooling type	Pressure oil circulating
5	Type of gearbox	Power shift, constant-mesh spur gear
6	Gear shift	2 forward and 1 reverse gears
2. Axle and Tire
1	Type of main reducer	Spiral bevel gear, single stage
2	Gear ratio of main reducer	4.625
3	Type of final reducer	Single stage planetary
4	Gear ratio of final reducer	4.929
5	Total gear ratios	22.795
6	Max. drawing force	150kN
7	Size of tire	23.5-25-16PR
Working Device Hydraulic System
1	Model of oil pump	JHP2080S
2	System pressure	19MPa
3	Model of distribution valve	HDS-32II-YL19
5	(DxL)Dimension of lifting cylinder	160x90x705(mm)
6	(DxL)Dimension of tilting cylinder	180x90x530 (mm)
Steering System
1	Type	Middle articulated frame. Full-Hydraulic flow amp. Steering
2	Model of steering pump	JHP2080S
3	Model of steering gear	TLF1-E1000B+FKB6020
4	System pressure	16MPa
5	Dimension of steering cylinder	90x400(mm)
Brake System
1	Type of traveling brake	Air over oil activate 4 wheel brake with caliper disc brake
2	Air pressure	6-7.5 (kgf/cm2)
3	Type of parking brake	Hand brake, flexible shaft control drum brake
Oil Capacity
1	Fuel (diesel)	250(L)
2	Engine lubricating oil	20(L)
3	Oil for converter and gear box	45(L)
4	Oil for hydraulic system	180(L)
5	Oil for driving axles (F/R)	26(L)
6	Oil for planetary reducer	14 (L)
7	Oil for braking system	3 (L)