2.3cbm Changlin 4tons Wheel Loaders with Cummins Engine (947H)

Changlin 4ton Wheel Loader with 2.3CBM Bucket Capacity (947H)
1. The 947H Wheel Loader is equipped with Dongfeng Cummins Engine.
2. The luxury cabin decoration and A/C of this wheel loader provide operator comfort.
3. This Wheel loader adopts 2 forward and 1 reverse power shift transmission.
4. The combined seal cylinder adopted by this wheel loader obtains high seal performance and more reliability.

Overall Dimension
1	Length(with bucket on ground)	7248(mm)
2	Width(to outside of wheels)	2570mm)
3	Bucket width	2685(mm)
4	Height(To the top of the cab)	3415(mm)
5	Wheel base	3080(mm)
6	Tread	2050(mm)
7	Min. ground clearance	408(mm)
Main Technical Specification
1	Rated load	4000(Kg)
2	Operating weight	13200KG
3	Rated bucket capacity	2.3(m3)
4	Max. breakout force	134kN
5	Max. dump clearance	2815(mm)
6	Dump reach	1050(mm)
7	Dump angle at any position	≥ 45º
8	Min. turning radius
	(1) Outside of bucket	6300(mm)
	(2) Outside of rear wheel	5730(mm)
9	Pivot angle frame	38±1º
10	Oscillating angle of rear axle	±11º
11	Lifting time of bucket	≤ 6.2(sec.)
12	Lowering time of bucket	≤ 3.8(sec.)
13	Dumping time	≤ 1.8(sec.)
14	Traveling speed (Km/h), 2 forward and 1 reverse
	(1) 1st gear forward	11
	(2) 2nd gear forward	36
	(3) 1st gear reverse	15
Diesel engine
1	Model		Dongfeng Cummins 6BT5.9 - C175
2	Type		Direct injection. Turbocharged. Water cooling4
3	Rated output		128(KW)
4	Inter-bore of cylinder/stroke		102 x120 (mm)
5	Total exhaust of cylinder		5.9 (L)
7	Current of Alternator		70(A)
8	Power of starting motor		6 (kw)
9	Voltage of starting motor		24(V)
10	Rated speed		2100(r/min)
11	Max. Torque		651(N. M)/1500rpm
12	Starting mode		Electric
13	Min. specific fuel consumption		207(g/Kw. h)
14	Specific oil consumption of engine		0.9-1.6 (g/km.h)
	Net weight		710 (kg)
Transmission System
1. Torque Converter
1	Model	YJHSW315
2	Type	4-elements. Double stage
3	Torque ratio	4
4	Cooling type	Pressure oil circulating
2. Transmission case
1	Model	Chinese Changlin
2	Type	power shift, spur gear constantly in mesh
3	Gear shift position	2 Forward and 1 reverse gears
3. Axle and Tire
1	Type of main reducer	Spiral bevel gear, single stage
2	Gear ratio of main reducer	5.286
3	Type of final reducer	Single stage planetary
4	Gear ratio of final reducer	4.4
5	Total ratios	23.258
6	Max. drawing force	120kN
7	Size of tire	20.5-25-16PR
Working Device Hydraulic System
1	Model of oil pump	CBGj3140
2	System pressure	180(kgf/cm2)
3	Model of distribution valve	D32II
5	(DxL)Dimension of lifting cylinder	150x80x695(mm)
6	(DxL)Dimension of tilting cylinder	180x90x468 (mm)
Steering System
1	Type	Middle articulated frame. Full-Hydraulic flow amp. Steering
2	Model of steering pump	CBGj2063/1016-XF
3	Model of steering gear	BZZ1-E630C+FKA-146020
4	System pressure	14MPa
5	Dimension of steering cylinder	70x40x460(mm)
Brake System
1	Type of traveling brake	Air over oil activate 4 wheel brake with caliper disc brake
2	Air pressure	6-8(kgf/cm2)
3	Type of emergency brake	Automatic cutting air brake
4	Type of parking brake	Drum brake Manual control cutting-off air brake
Oil Capacity
1	Fuel (diesel)	200(L)
2	Engine lubricating oil	13.5(L)
3	Oil for converter and gear box	45(L)
4	Oil for hydraulic system	160(L)
5	Oil for driving axles (F/R)	24/24(L)
6	Oil for brake	2x1.0 (L)