4X2 Forland 3ton Telescopic Crane Truck

A crane mounted on atruckcarrier provides the mobility for this type of crane. This crane has two parts: the carrier, often referred to as the Lower, and the lifting component which includes the boom, referred to as the Upper. These are mated together through a turntable, allowing the upper to swing from side to side. These modern hydraulic truck cranes are usually single-engine machines, with the same engine powering the undercarriage and the crane. The upper is usually powered via hydraulics run through the turntable from the pump mounted on the lower. In older model designs of hydraulic truck cranes, there were two engines. One in the lower pulled the crane down the road and ran a hydraulic pump for the outriggers and jacks. The one in the upper ran the upper through a hydraulic pump of its own. Many older operators favor the two-engine system due to leaking seals in the turntable of aging newer design cranes.

1,Crane capacity from 2Ton to 25Ton , include boom crane and Jib crane ,crane can be located at rear of cabin or rear of cargo according to customer requiremetns.
We also can sell crane only to install it on customer's chassis ,we can provide you drawing and other necessary information for installation .
crane brand like CLW , , SANY-PALFINGER, SHIMEI, UNIC,etc .

2,Chassis can be choose others like FAW , ISUZU , SINOTRUCK, FOTON , JAC , JMC ,SHACMEN ,NORTH BENZ , ETC ,

3, cargo dimension is according to customer requirements and chassis .

3, Warranty period is 8000KM or 12 month which comes first .

4,so if you have such requirements ,please contact me with TM:truck2011 or cell phone 86-13872885121.

specification of4x2 forland 3Ton telescopic crane truck

Vehicle	model	CLW5060JSQ3
	Overall dimension(mm)	6600*2200*3150
	GVW(Kg)	7350
	Curb weight(Kg)	4300/4650
	Max speed(km/h)	90
Chassis	Chassis model	BJ1072V3JBB-F1
	Engine model	YN33PE-1
	Engine manufacture	KUN MIN YUN NEI POWER
	Displacement(ML)	3298
	Power(KW)	76
	Cargo dimension(mm)	4100*2000*600
	Fuel	Diesel
	Wheel no	2
	Wheel base	3600
	Tyre No	6
	Tyre model	7.00-16
	suspension	9/8+6
	Axle	Front	3Ton
		Rear	5Ton

Crane specification :

Crane Model	SQ3.2SK1Q/SQ3.2SK2Q	unit
Max Lifting Capacity	3200	kg
Max Lifting Moment	6.72	T.M
Recommend Power	14	kw
Max Oil Flow of Hydraulic System	25	L/min
Max Pressure of Hydraulic System	20	MPa
Oil Tank Capacity	30	L
Rotation Angle	All Rotation
Crane Weight	1172/1316	kg
Installation Space	850	mm

SQ3.2SK2Qlifting capacity:

Working range(m) 2.1 3.365 5.465 7.565 Lifting weight(kg) 3200 1800 900 500

Photo of 4x2 forland 3Ton telescopic crane truck








certificate of factory :


FAQ:

Q1. Quality control
A:We make quality control for each step while producing and before shipping.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packagesbefore you pay the balance.LC terms is also can be accepted .

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.DAP etc .

Q4. How about your delivery time?
A: Generally, it will take 10 to 20 days after receiving your advance payment. The specific delivery time dependson the items and the quantity of your order.For standard products, delivery time is as below:Water tanker truck:7 days
Fuel tanker trailer:15-20days
Garbage truck:15 days
Sweeper road truck:25 days
Wecker truck:7-10 days
Suction sewage/Fecal truck:7-15 days
Crane truck:15 days
Refrigerator/Van truck:7-15 days
Dump truck:20 days
Concrete mixer truck:7-25 days
LPG :20-30 days
LED truck:7-15 days
(the above is left hand drive chassis ,if you need the right hand drive chassis ,delivery time is longer than Left hand drive truck,Detailed clauses are subject to contract .)

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. How to control truck quality?
A: we have Rich experienceworkers and engineer to control quality before and on production , we strictly followed STATE special truck technical specificationandsafety production specification .We have been in this line for over 15 years, dealing with all kinds of special trucks and trailers.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,no matter where they come from.Q9. Did you sell truck to our country before?A:Our main market is Africa, Asia, South America , Oceania,middle east , annual sales is around 5000units and keeping growing every year .