High Performance Liugong Motor Graders 418III with Cheap Price

High performance Liugong motor graders 418III with cheap price

Feature

Easy to Maintain

Hydraulic pipes on both sides of frame for easy maintenance.Easy engine access and access to main maintenance points

Reliability

Power cuts off if hand brake not removed, this prevents accidental damage.Parts, service and attachments you can count on.World-class suppliers of key components.

Operator Comfort and Safety

Comfortable adjustable suspension seating.Air Conditioning optional.Full range of visibility.

Parameters

Engine		DCEC 6CTAA8.3-C215
Rated Power	(kW)	160(215)@2200
Blade Width	mm(inches)	3960(156)
Maximum Speed	km/h (mph)	40.3 (25)
Draw Bar Pull	(kN)	86
Operating Weight	kg(Lb)	16500(36376)
ENGINE
Tier		II
Make
Gross Power	kW(Hp)@rpm	160(215)@2200
Net Power	kW(Hp)@rpm	144(195)@2200
Peak Torque		908N.m/1500rpm
Torque Rise %		31%
Number of Cylinders		6
Aspiration		turbo air-to-air aftercooled
TRANSMISSION
Transmission Type		power shift
Transmission Configuration		6f/3r
Torque Converter		three-member single turbine
Maximum Travel Speed, fwd	(km/h)	42 (25.8)
Maximum Travel Speed, rev	(km/h)	25.6 (15.9)
Number of Speeds, fwd		6
Number of Speeds, rev		3
AXLES
Front Axle Make		LiuGong Weld axle
Rear Axle Make		Meritor
Differential Type		No-spin limited slip standard
Final Drive Type		chain drive
Axle Oscillation		±15°
Front Axle Type		all welded steel frame
Front Axle, Wheel Lean Angle		±17°
STEERING
Steering Configuration		load sensor steering gear
Steering Relief Pressure	(Mpa)	17
Minimum Turning Radius	(inches)	8000(315)
Steering Angle		±45°
frame Articulation Angle		±20°
BRAKES
Service Brake Type		(Dry)shoe
Service Brake Location		rear axle only
Service Brake Actuation		hydraumatic
TIRES
Tire Size		17.5-25 PR12/L3
HYDRAULIC SYSTEM
Main Pump Type		gear
Main Relief Pressure	(Mpa)	18
Pilot Pump Flow	L(Gal)/min	126(33)
WORKING CAPACITIES
Maximum Draw Pull	(kN)	90
Cutting Pressure	kg(Lb)	8100(17857)
TANDEM DRIVE PERFORMANCE
Height	mm(inches)	600(24)
Width	mm(inches)	210(8)
Thickness, inner wall / outer wall	mm(inches)	20/20(0.8/(0.8)
Center Distance	mm(inches)	1538(61)
Oscillating Angle		±15°
MOLDBOARD PERFORMANCE
Bank Cut Angle		40~70
Moldboard Lift Above Ground	mm(inches)	405(16)
Moldboard Side Shift, right / left	mm(inches)	725/675(29/27)
Maximum Sloping Angle		90°
Cutting Depth	mm(inches)	600(24)
Circle Rotation		360°
Circle Diameter	mm(inches)	1455(57)
Circle Thickness	mm(inches)	140(6)
DIMENSIONS
Wheelbase	mm(inches)	6230(245)
Overall Length	mm(inches)	8971(353)
Overall Height with Cab		3438(135)
Overall Width	mm(inches)	2600(102)
Clearance under Front Axle	mm(inches)	645(25)
Moldboard Standard Length	mm(inches)	4270(168)
Moldboard Standard Thickness	mm(inches)	19(0.7)
Moldboard Standard Height	mm(inches)	650(24)
OPERATING WEIGHTS
Operating Weight	kg(Lb)	16500(36376)
On Front Wheels	kg(Lb)	4700(10362)
On Rear Wheels	kg(Lb)	11800(26015)
SERVICE CAPACITIES
Fuel Tank	L(Gal)	230(61)
Engine Oil	L(Gal)	22(6)
Cooling System	L(Gal)	45(12)
Hydraulic Reservoir	L(Gal)	186(49)
Transmission And Torque Converter	L(Gal)	45(12)
Tandems, Each	L(Gal)	28(7)

Contact

Mobile: +86-18356287971
Picture

Our company
We, Newindu E-Commerce (Shanghai) Co., Ltd, are professional in construction machinery for nearlly 10 years,exporting with good quality and low price, having excavator,truck crane,bulldozer,wheel loader,motor grader,drilling rig,Dump Truck,road roller,forklift,reach stacker,and also including the spare parts,etc.