/
8m3 Concrete Mixer Truck (WS5250GJB)
- USD 10000.00 /Unit
- 1 Unit
- 63 Unit
- 30 days
Product Description
Specifications
8m3 Concrete Mixer Truck
1. Mixing Cubage: 8m3
2. Mixing Drum Slope Angle: 10%
3. Chassis Model: HOWO ZZ1257N3247C
FEATURE&FUNCTION of sino new HOWO mixer truck:
Italian speed reducer, hydraulic pump and hydraulic motor; Taiwanese radiator
Equiped with control system in cabin, so could be operated inside or outside of the cabin
Water supplying system could supply water and wash the inner body.
Material let-in: 3m3/minute, let-out: 2m3/minute; Rate of rest<1%; Speed of leaf: 20 round/minute
1. The tank body uses double helical blades that makes its density moderate, with symmetrical mixing board on the front taper place; Double blades and guiding blades of discharge are installed on the outlet of tank, which makes the discharge faster in speed.
2. The tank body adopts submerged arc welding technology which makes it more solid in strength and more beautiful in appearance. The linked parts of the tank body use bounded construction which can extend its service life. The seal head adopts German cold spinning technology that makes it sleek and fine in appearance. And
Six reinforcement plates are installed inside the seal head and can increase its wear resistance.
3. Low angle for mixing drum can extend the service life of hydraulic pump. The sub frame uses high intensity square tube with damping in the central area that can play role when vehicle is at full load and under the bad conditions of road, which can lower the center of gravity of truck and make it move more smoothly.
8m3 Concrete Mixer Truck
1. Mixing Cubage: 8m3
2. Mixing Drum Slope Angle: 10%
3. Chassis Model: HOWO ZZ1257N3247C
FEATURE&FUNCTION of sino new HOWO mixer truck:
Italian speed reducer, hydraulic pump and hydraulic motor; Taiwanese radiator
Equiped with control system in cabin, so could be operated inside or outside of the cabin
Water supplying system could supply water and wash the inner body.
Material let-in: 3m3/minute, let-out: 2m3/minute; Rate of rest<1%; Speed of leaf: 20 round/minute
1. The tank body uses double helical blades that makes its density moderate, with symmetrical mixing board on the front taper place; Double blades and guiding blades of discharge are installed on the outlet of tank, which makes the discharge faster in speed.
2. The tank body adopts submerged arc welding technology which makes it more solid in strength and more beautiful in appearance. The linked parts of the tank body use bounded construction which can extend its service life. The seal head adopts German cold spinning technology that makes it sleek and fine in appearance. And
Six reinforcement plates are installed inside the seal head and can increase its wear resistance.
3. Low angle for mixing drum can extend the service life of hydraulic pump. The sub frame uses high intensity square tube with damping in the central area that can play role when vehicle is at full load and under the bad conditions of road, which can lower the center of gravity of truck and make it move more smoothly.
| Total Length(mm) | 8715 |
| Total Width(mm) | 2496 |
| Total Height(mm) | 3800 |
| Chassis Model(mm) | HOWO ZZ1257N3247C |
| Max G W(kg) | 2500 |
| Engine Model | WD615.95,WD615.96 |
| Engine Rated Power(kw) | 247 |
| Water Volume(L) | 310 |
Product Images
-
4X2 Type 5m3 6m3 FotUS $20900.00 /Unit -
Shacman F3000 8X4 TyUS $51000.00 /Unit -
SHACMAN F3000 6x4 coUS $44900.00 /Unit -
Foton 4x2 2 3 cubicUS $9000.00 /Unit
