Sinotruk HOWO 6X4 50 Ton Mining Truck

China HOWO 50 ton Dump Truck 6x4 for Mine Truck


1. Truck appearance

1. 1). Design principles for Practical and simple maintenance;Using many straight line and Flat line.
Because the particularity of mining vehicle operation environment, it doesn't need to consider some factors such as wind resistance;

1. 2).Cab assembly adopts unilateral skeleton skin structure, the double hydraulic suspension bracket improving comfort.

1. 3). Open the cab front panel, at the top, can see the cabin internal air filtration system. Oil check measurements, hydraulic clutch, brake pump, maintenance more convenient.
1.4). Cab USES unilateral design, there is a maintenance platform on the right side.
In the inside of the box is plumbing boiler fuel. Cold region in winter, it can make the water circulation system of vehicle heated to 80 degrees, even under the low temperature of 40 degrees below zero can easily start, it can prolong the life of the engine, and driving the indoor warm.
1.5). Large combined engine air filter consists of paper filter, oil bath type air filter. Daily maintenance process easier.

2. Truck Cabin.


2.1). Instrument workbench facilities is rich, all kinds of button layout is reasonable, look more tidy, conform to the trend of The Times.
2.2). On the left side of the door with six holes warm wind of gangway arrangement,
Audio and other entertainment equipment installation at the top,
The right rear view mirror observation area basic no blind area,
2.3). Rest area on the right side can sit, lie down and do not feel crowded

2.4). Sleeping area space around here are divided into two parts, the left side of the layout of electrical central processor unit, such as unit assembly on the right side is the glove box. Although electrical parts at the expense of the part space, maintenance more convenient.
3. Truck Chassis

3.1). Jacket floor has five longitudinal beam layout, are arranged well glyph dense, carrying capacity is very strong
3.2). Beside the axle is equipped with steering hydraulic cylinder, the front axle is integral cast steel h beam punch type, with the horizontal stabilizer bar,
3.3). Inter-cooled fence, steel double u-bolt, enhanced the rotation system assembly, AC16 integral cast steel two-stage deceleration double rear axle, mining area special tires.
3.4) Battery and gas reservoir, pneumatic dryer are decorated on the right rear side

Descriptions & Specifications

HOWO 6x4 Mining Dump TruckZZ5507S3640AJ;LHD.

Engine: CNHTC brand WD515.47T2, diesel engine, 371 Hp, Euro 2 emission;6 in-line, 4 strokes, turbocharger & intercooler, water cooling, rigid fan,11.596 litre,Exhaust valve brake(EVB)

Transmission: HW19712,12-speed manual gearbox;

Steering: ZF8118 hydraulic steering with power assistance

Front axle: HF10cast steel h beam punch type front axle.

Rear axle:AC26, central + hub double reduction,Drum brake i=8.51;

Cab: HW7DUnilateral cab,with air conditioner;

Rim/Tyres: 13.00-25bias tire;

Brake: without ABS system

Carriage Internal Dimensions:5500x2800x1600mm;

Wheelbase(front/rear):3600 mm

Steel thickness of Carriage:Floor: 12mm, Side: 10mm

Lift model :Depp keller 4 tg - F172x4700 hydraulic system

English panel; Color, chassis: white; Bucket: black; (optional)

Whole truck dimensions:8334x2960x3570mm;

Dead weight:21000kgs, Gross vehicle weight:50000s

Fuel Tank: 400L;

With front ladder and side ladder on the cargo box; Make the rear bumper bold (Made of steel tube: Diameter >140mm, thickness >6mm);